What a failing toilet does in the bathroom
The fill valve never shuts. The bowl runs at the rim. Water weeps at the base after a flush. The toilet rocks. A plunger helps for an hour, then the backup returns. Those are toilet repair signs, and they also tell us whether to stay in the tank or look past the flange.
Tank, seal, flange, or the line
A flapper, a fill valve, or a loose chain is a short repair. A failed wax ring or a rocking bowl is a reset if the flange is sound. If two bathrooms are slow, or a tub fills when you flush, the visit includes a look at the drain and may move into drain cleaning with a camera.
If water is already at the base of the toilet or on the bath floor, call us at (830) 354-4767 before the subfloor gets soft.
When toilet trouble is not only the toilet
A bath that backs up at the toilet and the shower is a line problem. A closet that will not refill can also share the visit with no hot water or a faucet that is already starving for supply. We sort the tank from the branch so you do not buy a new bowl for a main line clog.
The longer list of house trades is on plumbing services. A bath that is already flooded should start on emergency plumbing, and the About and FAQ pages cover the shop and the towns we drive to.
Toilet repair and installation cost in Kerrville
Toilet prices in Kerrville vary with the repair or the fixture you choose and with the condition of the flange and shutoff.
| Service | Typical cost in Kerrville |
|---|
| Toilet repair | $125 to $350 |
| Toilet installation | $250 to $700 |
| Fill valve or flapper work | $125 to $300 |
| Wax ring and reset | $150 to $350 |
These figures are typical ranges for Kerrville and the Hill Country area, not a final bill. The final price depends on the problem, the parts, how hard the work is to reach, and whether the call is after hours. We diagnose on site and give you the number before any repair starts.
Compare these figures with the full list on our plumbing cost in Kerrville page, or call (830) 354-4767.
Why does my toilet clog all the time?
Frequent clogs usually mean low flow from an older low-GPF bowl, a partial blockage in the trap, or buildup farther down the line. Older Kerrville homes with original toilets installed before modern flush standards clog more often. We check the trap first, then the branch line if clogs keep coming back within days.
How much does it cost to fix a running toilet?
Most running toilet repairs in Kerrville run $125 to $350 depending on whether it is a flapper, fill valve, or flush valve seat. Hard water buildup often means replacing more than one part at once. We diagnose on site and confirm the price before starting work.
Is a leaking toilet an emergency?
Water pooling at the base or dripping through the ceiling below is an emergency. It can mean a failed wax ring, a cracked tank, or a supply line failure, and it often damages subfloor or drywall fast. Shut off the supply valve at the wall and call us right away.
Why is my toilet leaking at the base?
A toilet leaking at the base is almost always a worn wax ring, a cracked flange, or loose closet bolts. On older slab-foundation homes around Kerrville, a slightly uneven floor can also keep the bowl from sealing. We reset the bowl on a new ring and check the flange before anything goes back down.
Questions about this work
Why does a toilet in Kerrville keep running after it fills?
A running toilet is often a flapper that no longer seats, a refill valve that stays open, or a chain that is too tight. Mineral scale from city water can keep a flapper from seating. We open the tank, test the valves, and replace what has failed before we talk about a new bowl.
When is a clogged toilet in Kerrville a sewer line problem?
If two baths act up together, if a nearby tub fills when you flush, or if a cleanout is already weeping, the line past the closet is in play. We try the closet first, then camera the run when the overflow is not just paper in that one bowl.
Can you reset a rocking toilet in a Kerrville bathroom?
Yes, if the flange is sound and the floor has not gone soft. We reset the bowl on a new wax ring or gasket, check the closet bolts, and look at the flange height. A rotten floor or a broken flange is a larger repair, and we will tell you that before the bowl goes back onto the closet.
Do you replace toilets in Kerrville or only repair them?
Both. Toilet repair covers valves, flappers, seals, and a reset on a good flange. A cracked bowl, a failed glaze at the trap, or a toilet that rocks on a broken flange is a replacement. We can often finish that swap on the same visit when the new unit is on the truck.
A Kerrville plumber who checks the tank and the line on the same visit can tell you whether this is a valve or a sewer problem. Call (830) 354-4767 now if the bowl will not stop running or the bath is already backing up.
Service ZIPs: 78028, 78025, 78631, 78013, 78010